Victron BlueSolar MPPT 250/70-Tr VE.Can

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from the solar panel into energy that optimally charges the battery.

Victron BlueSolar MPPT 250/70-Tr VE.Can

Features:

Solar charge controller
‍TheSmartSolar charge controllerwill charge even a severely discharged battery. It can operate with battery voltages as low as 0 volts, provided the cells are not sulfated or otherwise damaged.

MPPT: Ultra-fast tracking of maximum power points
‍TheMPPT VE.Can SmartSolar chargerconnects to a 150 or 250 Volt PV system and automatically detects and charges a 12, 24 or 48 Volt battery with a current of 70 to 100 A depending on the model. The charge settings are fully programmable and can even be customized for different battery chemistries such as lead-acid, lithium, and others.

Control the charger remotely
‍TheMPPT VE.Can SmartSolar chargercan be remotely monitored and configured via Bluetooth using the VictronConnect App. This allows you to configure and control the device and receive instant information such as battery voltage and current, PV module voltage and current, and historical data.

Optional serial connection modules
‍TheVE.Can SmartSolar chargeris equipped with CAN bus ports. This enables communication with additional VE.Can SmartSolar chargers. The additional devices are simply connected to each other using a single RJ45 cable between the individual devices. When connected to each other, all individual VE.Can SmartSolar chargers synchronize their charge stages. They can also transmit their data via a single cable to the GX monitoring device.

Remote Monitoring and Control
‍Whenyour GX is connected to the internet, the Victron Remote Management (VRM) portal gives you access to the full power of your solar chargers. For remote installations - even if there is no internet connection nearby - you can monitor your MPPT by connecting a GlobalLink 520.

SmartSolar control display
‍TheVE.Can SmartSolar chargeris also equipped with a VE.Direct port, just like our other MPPT solar chargers. This port can be used to monitor a single device or to control street lights. The remote on/off connector can be controlled from the outside using a third-party device such as a lithium battery. The optional plug-in LCD display/control provides real-time data display, configuration and control directly from the front panel of the device.